- GattInfo() - Constructor for class com.sensoro.beacon.kit.connection.BluetoothLEHelper.GattInfo
-
- GattInfo() - Constructor for class com.sensoro.beacon.kit.connection.BluetoothLEHelper4.GattInfo
-
- getAccelerometerCount() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the trigger count of the acceleration sensor of beacon.
- getAccelerometerSensitivity() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getAccelerometerSensitivity() - Method in class com.sensoro.beacon.kit.SensorSettings
-
Get the accelerator sensor sensitivity of the beacon.
- getAccelerometerSensitivityValue(AccelerometerSensitivity) - Static method in enum com.sensoro.beacon.kit.constants.AccelerometerSensitivity
-
- getAccleromerterSensitivity(int) - Static method in enum com.sensoro.beacon.kit.constants.AccelerometerSensitivity
-
- getAccuracy() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the accuracy to the beacon.The accuracy is effected by the
environment.
- getAdvCount() - Method in class com.sensoro.beacon.kit.TLM
-
- getAdvertisingInterval() - Method in class com.sensoro.beacon.kit.BaseSettings
-
Get the advertising interval of the beacon
- getAdvertisingInterval() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the advertising interval of the beacon
- getAdvertisingInterval() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getAdvertisingInterval(int) - Static method in enum com.sensoro.beacon.kit.constants.AdvertisingInterval
-
- getAdvertisingIntervalValue(AdvertisingInterval) - Static method in enum com.sensoro.beacon.kit.constants.AdvertisingInterval
-
Get the millisecond of AdvertisingInterval.
- getBaseSettings() - Method in class com.sensoro.beacon.kit.Beacon
-
- getBaseSettings() - Method in class com.sensoro.beacon.kit.connection.BluetoothLEHelper
-
- getBattery() - Method in class com.sensoro.beacon.kit.TLM
-
- getBatteryLevel() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the rest percent of the battery level.
- getBeaconDBDao() - Method in class com.sensoro.cloud.DaoSession
-
- getCloudUploadPeriod() - Method in class com.sensoro.cloud.SensoroManager
-
Get the period the beacons is uploaded.
- getEddystoneBID() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEddystoneEIDCounter() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEddystoneEIDIKey() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEddystoneEIDRotK() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEddystoneNID() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEddystoneTLM() - Method in class com.sensoro.beacon.kit.Beacon
-
- getEddystoneTLMInterval() - Method in class com.sensoro.beacon.kit.Beacon
-
- getEddystoneTLMInterval() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEddystoneTLMInterval(int) - Static method in enum com.sensoro.beacon.kit.constants.EddystoneTLMInterval
-
- getEddystoneUID() - Method in class com.sensoro.beacon.kit.Beacon
-
- getEddystoneURL() - Method in class com.sensoro.beacon.kit.Beacon
-
- getEddystoneURL() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEnergySavingMode() - Method in class com.sensoro.beacon.kit.BaseSettings
-
Get energy saving mode of the beacon.
- getEnergySavingMode() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getEnergySavingMode(int) - Static method in enum com.sensoro.beacon.kit.constants.EnergySavingMode
-
- getFirmwareVersion() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the firmware version of the beacon.
- getHardwareModelName() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the hardware model of the beacon
- getHexCharValue(char) - Static method in class com.sensoro.beacon.kit.SensoroUtils
-
- getInstance(Context) - Static method in class com.sensoro.beacon.kit.SensoroBeaconManager
-
Get the instance of SensoroBeaconManager
- getInstance(Context) - Static method in class com.sensoro.cloud.SensoroManager
-
Get the instance of SensoroManager
- getLight() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the illumination intensity of the beacon.
- getLightSamplingInterval() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getLightSamplingInterval() - Method in class com.sensoro.beacon.kit.SensorSettings
-
Get the interval of sampling light.
- getMacAddress() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the mac address of the beacon.
- getMajor() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the major of the beacon.
- getMajor() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getMeasuredPower() - Method in class com.sensoro.beacon.kit.BaseSettings
-
Get the measured rssi(mrssi) of the beacon.
- getMeasuredPower() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the measured power(mrssi) of the beacon.
- getMeasuredPower() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getMinor() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the minor of the beacon.
- getMinor() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getMovingState() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the moving state of the beacon.
- getProximity() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the proximity of the beacon.
- getProximityUUID() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the UUID of the beacon.
- getProximityUUID() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getReceivedPacketBytes() - Method in class com.sensoro.beacon.kit.connection.ReceivePacket
-
- getResponse() - Method in class com.sensoro.beacon.kit.connection.BluetoothLEHelper4
-
get cmd response.
- getResultCode() - Method in class com.sensoro.beacon.kit.connection.CmdResponse01
-
- getRssi() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the rssi of the beacon.
- getSecondMajor() - Method in class com.sensoro.beacon.kit.Beacon
-
- getSecondMinor() - Method in class com.sensoro.beacon.kit.Beacon
-
- getSecondProximityUUID() - Method in class com.sensoro.beacon.kit.Beacon
-
- getSecureBroadcastInterval() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the rotation time of secure broadcast of beacon.
- getSecureBroadcastInterval() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getSecureBroadcastInterval(int) - Static method in enum com.sensoro.beacon.kit.constants.SecureBroadcastInterval
-
- getSecureBroadcastInterval(int) - Static method in class com.sensoro.beacon.kit.SensoroUtils
-
- getSecureBroadcastIntervalInt(SecureBroadcastInterval) - Static method in class com.sensoro.beacon.kit.SensoroUtils
-
- getSecureBroadcastRotation() - Method in class com.sensoro.beacon.kit.connection.BluetoothLEHelper
-
read rotation broadcast period.
- getSendCmdType() - Method in class com.sensoro.beacon.kit.connection.BluetoothLEHelper4
-
- getSensoroSettings() - Method in class com.sensoro.beacon.kit.connection.BluetoothLEHelper
-
read all parameters in SensorSettings
- getSensorSettings() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the sensor settings of the beacon.
- getSensorType() - Method in class com.sensoro.beacon.kit.connection.CmdUpdateSensorResponse
-
- getSensorValue() - Method in class com.sensoro.beacon.kit.connection.CmdUpdateSensorResponse
-
- getSerialNumber() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the SN of the beacon.
- getService() - Method in class com.sensoro.beacon.kit.BeaconService.BeaconServiceV4Binder
-
- getStartTime() - Method in class com.sensoro.beacon.kit.TLM
-
- getTemperature() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the environment temperature of the beacon.
- getTemperature() - Method in class com.sensoro.beacon.kit.TLM
-
- getTemperatureSamplingInterval() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getTemperatureSamplingInterval() - Method in class com.sensoro.beacon.kit.SensorSettings
-
Get the interval of sampling the temperature.
- getTransmitPower() - Method in class com.sensoro.beacon.kit.BaseSettings
-
Get the transmit power of the beacon.
- getTransmitPower() - Method in class com.sensoro.beacon.kit.Beacon
-
Get the transmit power of the beacon.
- getTransmitPower() - Method in class com.sensoro.beacon.kit.connection.CmdReadConfigurationResponse
-
- getTransmitPower(int) - Static method in enum com.sensoro.beacon.kit.constants.TransmitPower
-
- getTransmitPowerValue(TransmitPower, String) - Static method in enum com.sensoro.beacon.kit.constants.TransmitPower
-
Get the real value of transmit power by model.
If the transmit power is com.sensoro.beacon.kit.BaseSettings.TransmitPower#UNKNOWN
or the value of model is invalid, it will return null.
- getType() - Method in class com.sensoro.beacon.kit.connection.CmdResponse01
-
- getVersion() - Method in class com.sensoro.beacon.kit.connection.CmdResponse
-